EliteProjector® LLC manufactures portable and outdoor projectors for Outdoor & Indoor applications.
EliteProjector LLC was established in early 2020 in North America as part of the Elite Screens Visual and Sound (ESVS) Inc, a Projector R&D Manufacturer in Taiwan.
EliteProjector is the creator of MosicGO®, a portable projector that with its own integrated sound system and power bank for other devices. With its durability for indoor/outdoor projection, MosicGO® works with a portable screen as a standalone solution for movies, music and power “to go”. From office meetings to barbecues and camping trips, think MosicGO®, “Movies, Music, Power, Go!”.
projector screen
TIPS TO KEEP YOUR PROJECTOR RUNNING LONGER
The best projectors aren’t cheap. So, naturally you’d want to keep your projector running as long as possible to get the most out of your investment.
We’ve compiled a list of tips and tricks to better maintain your projector so you can enjoy watching movies and TV for as long as possible. Some may seem obvious (we’ve seen enough people to assure you they’re not always to everyone), some tips are extra precautionary levels but all of them have some value to keep your projector functional.
The Obvious Tips
Don’t allow objects of any kind to enter any openings of the projectors
Don’t shake the projector
Keep magnets away from your projector
Do not stand on the projector or place heavy objects on it.
Keep away from open flames
elite projector
Buy The Right Projector
Only buy a video projector from an authorized dealer
Buy a laser projector with a longer lasting light source (around 25,000 hours)
Only have your projector repaired at authorized service centers
Operating Your Projector
Keep the lens cap on the projector when not in use
Do not use the projector outside of the recommended temperature range of 41 to 95 ºF (5 to 35 ºC)
Listen for any loud clicking, buzzing, whirling or mechanical noises as that could be a sign of a mechanical issue with the internal mechanisms
Never open the chassis on the projector except as specifically explained in the owner's manual
When not in use, power down your projector
Avoid frequently turning the projector on and off
Don’t operate the projector non-stop. Turn it off for at least one hour every 24 hours.
If you don’t need the extra brightness, operate your projector in “Eco”, “Economy” or “Low Power” mode
To avoid dust build-up keep the room where you use your projector clean, vacuum regularly and use a air purifier to take dust out of the air
elite projection
Projector Placement
Make sure your projector is securely mounted
Make sure any mount is rated to support the weight of your projector
Make sure there is at least 7.9 inches of space between a wall and the exhaust vent
Do not operate the projector in a closed-in cabinet unless proper ventilation is provided.
Keep out of reach of young children and pets
Avoid placing the projector where it can be bumped into
Keep any power or A/V cables off the floor where they can be tripped on or walked on
Do not use the projector where it may be exposed to rain, water, or excessive humidity
Do not operate the projector on its side, or while tilted to one side
Do not place anything that can become warped or damaged by heat near the exhaust vents.
Do not use adhesives to mount your projector, overtime they can lose their stickiness and cause your projector to fall
mobile led projector
Replacing The Lamp
Do not handle replacement bulbs with your bare hands
Before removing the bulb make sure the power is off and it has had at least 30 minutes to cool down
Do not disassemble the lamp
Only use Genuine OEM projector replacement lamps
Cleaning And Maintaining Your Projector
Make sure you clean your projector the right way
Keep the air filters clear of dust
Replace the air filters regularly
Do not wait for the projector to warn you to change the filters
Don’t use abrasive cloths or sponges to clean your projector
Don’t use harsh liquid or aerosol cleaners, or solvents such as alcohol, paint thinners or benzine
Only place the projector on stable surface
Don’t use the projector on a couch, rug, on papers or other soft surfaces
Don’t use the projector near water, sources of heat, high-voltage electrical wires, or sources of magnetic fields
Replace the batteries in the remote every two years to prevent battery fluid leakage
outdoor short throw projector
Moving Your Projector
Before you move the projector, make sure its power is turned off, the plug is disconnected from the outlet, and all cables are disconnected.
When transporting the projector try to keep it level
Make sure the lens is covered either with the lens cap or a lens pad
Remove the mounting from the projector before moving it
When moving the projector to different locations try to transport it in its original packaging
When transporting the projector a long distance or as checked luggage, pack it in a firm box with cushioning around it and mark the box "Fragile."
portable short throw projector
Projector Storage
Don’t store the projector in a overly hot location, such as near a heater, in direct sunlight, or in a closed vehicle
Do not store the projector outdoors for an extended length of time
Do not use or store the projector where it may be exposed to smoke, steam, corrosive gases, excessive dust, vibration, or shock
Unplug the projector when it will not be used for extended periods.
Run your projector at least twice a year when not in use
new ust projector
Projector Power
Don’t unplug the projector without powering it down
Wait for the cooling fan to stop before unplugging the projector
Don’t yank the cord out, hold the plug itself when disconnecting
Don’t plug the device into a dusty outlet
Don’t plug it in with wet hands
Don’t overload wall outlets, extension cords or power strips
Unplug the projector during an electrical storm
If you use the projector in a country other than where you purchased it, use the correct power cord for that country.
If the power cord is at all damaged do not use the projector. Get a replacement cord.
ust projector screen
Projector Safety
Never look directly into the projector when it’s on
If the lamp breaks, ventilate the room to prevent gases contained in the lamp from being inhaled or coming in contact with your eyes or mouth. If you inhale gases or if they come in contact with your eyes or mouth, seek medical advice immediately as they can be very toxic.
Using multiple projectors together
Don’t stack your projectors directly on top of each other
If you are using two or more projectors side-by-side, leave at least 2 feet (60 cm) of space between the projectors to allow for proper ventilation.